国内女人喷潮完整视频,免费看三片在线播放,国产人妻互换一区二区水牛影视,最新吃瓜爆料免费观看

users viewing this material also viewed the following:

covestro bayblend® t45 polycarbonate + abs

covestro bayblend® ku 2-1514* polycarbonate + abs, flame retardant grade

covestro bayblend® t45 pg polycarbonate + abs

covestro bayblend® ku 2-1514 bbs073* polycarbonate + abs, flame retardant grade

covestro bayblend® fr 110 polycarbonate/abs blend

tpe (thermoplastic elastomer) /hx-080an (b) / hunan chang sheng

use: other

characteristic notes: good tear strength

important parameters: density: 0.96 g/cm3 tensile strength: 10.8 mpa elongation at break: 500％ hardness: 80 brittleness temperature: -60

manufacturer: hunan chang sheng petrochemical co., ltd.

tpe (thermoplastic elastomer) /p3991/ nantong premarin

use: other

characteristic notes: polypropylene adhesion【敏感詞】separate molding

important parameters: density: 0.9 g/cm3 molding shrinkage: 1.3％ tensile strength: 19 mpa elongation at break: 625％ hardness: 91

manufacturer: nantong premarin elastomer technology co. ltd.

tpe (thermoplastic elastomer) /md-130/ united states apex teknor

use: other

important parameters: melt flow rate: 0.5 g/10min density: 0.888 g/cm3 molding shrinkage: 2.6％ tensile strength: 6.21 mpa elongation at break: 730％ hardness: 45

manufacturers: the united states apex teknor company

tpe (thermoplastic elastomer) /md-145/ united states apex teknor

use: other

tpe (thermoplastic elastomer) /wy6565/ polymer 1912

use: other

characteristic remarks: injection molding, extrusion molding

important parameters: density: 0.93 g/cm3 tensile strength: 400 mpa elongation at break: 140％ hardness: 68

manufacturer: wenzhou ocean macromolecule material factory

tpe (thermoplastic elastomer) /wy8085/ polymer 1912

use: other

characteristic remarks: injection molding, extrusion molding

important parameters: density: 1.21 g/cm3 tensile strength: 35 mpa elongation at break: 500％ hardness: 80

manufacturer: wenzhou ocean macromolecule material factory

tpe (thermoplastic elastomer) 110/ /kp italy franceschetti francesco

use: other

note: the characteristics of gloss, high scratch resistance climate impact performance is good

important parameters: density: 0.89 g/cm3 elongation at break: 700％ bending modulus: 110 mpa

tpe (thermoplastic elastomer) 113/ /to france cts

use: other

tpe (thermoplastic elastomer) /m99950/ ningbo three

use: other

full health performance: allow direct contact with skin【敏感詞】non greasy food.

important parameters: melt flow rate: 1.8 g/10min density: 0.9 g/cm3 tensile strength: 5.3 mpa elongation at break: 1050％ hardness: 50 transmittance: 68％

three bo polymer alloy (ningbo) co., ltd.

tpe (thermoplastic elastomer) /cl-2845/ astrotech polymer

use: other

features: non-toxic environmental protection, can replace rubber, pvc【敏感詞】other materials.

important parameters: melt flow rate: 34 g/10min density: 1.07 g/cm3 molding shrinkage: 2％ tensile strength: 4 mpa elongation at break: 400％ hardness: 45

tpe (thermoplastic elastomer) /1451/ germany melos

use: other

characteristic note: low compression permanent deformation rate, good workability, high elasticity, good flexibility, good resistance to uv, good coloring, no halogen.

important parameters: melt flow rate: 1.1 g/10min density: 1.1 g/cm3 tensile strength: 15 mpa elongation at break: 500％ hardness: 33

manufacturer: melos, germany

tpe (thermoplastic elastomer) /1460/ germany melos

use: other

characteristic note: low compression permanent deformation rate, good workability, high elasticity, good flexibility, tpe (thermoplastic elastomer) /8200e75/ guangdong poly

usage: wire【敏感詞】cable material

features: environmental protection non-toxic, through the european union rohs, reach, sgs【敏感詞】other test certification, flame retardant products through the united states ul certification of a wide range of hardness, mechanical properties, processing convenience

important parameters: density: 0.96 g/cm3 hardness: 75

manufacturer: guangdong poly stone chemical limited by share ltd

tpe (thermoplastic elastomer) /8200f90/ guangdong poly

usage: wire【敏感詞】cable material

features: environmental protection non-toxic, through the european union rohs, reach, sgs【敏感詞】other test certification, flame retardant products through the united states ul certification of a wide range of hardness, mechanical properties, processing convenience

important parameters: density: 1.12 g/cm3 hardness: 90

manufacturer: guangdong poly stone chemical limited by share ltd

tpe (thermoplastic elastomer) /8200e80/ guangdong poly

usage: wire【敏感詞】cable material

features: environmental protection non-toxic, through the european union rohs, reach, sgs【敏感詞】other test certification, flame retardant products through the united states ul certification of a wide range of hardness, mechanical properties, processing convenience

important parameters: density: 0.95 g/cm3 hardness: 80

manufacturer: guangdong poly stone chemical limited by share ltd

tpe (thermoplastic elastomer) /8200f85/ guangdong poly

供應德國拜耳bayblend pc/abs系列產品：

型號：pc/abs

bayblend fr3040

性能：(pc + abs)混合，無筋，阻燃，對于薄壁應用程序，注塑品位，維卡軟化點/ b 120 = 108°c，熱變形/ > = 85°c，非常好的燃燒，銻-，氯  和溴  阻燃劑  。

型號：pc/abs bayblend fr3030

性能：(pc + abs)混合，無筋，阻燃，擠壓品位，維卡軟化點/ b 120°c的溫度= 115，良好的擠壓和真空成型，ul 94 v 0(1.5mm)，無鹵環保型根據din vde 0472，灼熱絲溫度(gwfi)：960°c在1.0mm。

型號：pc/abs bayblend fr3021      

性能：(pc + abs)混合，15％的礦物填充，阻燃，注塑品位，增加剛度，拉伸模量= 4800 mpa，維卡軟化點/ b 120°c的溫度= 98，ul 94 v 0(1.5mm)，銻-，氯  和溴  自由阻燃，輝光線測試(gwfi)：960°c(2.0mm)。

型號：pc/abs bayblend fr3020

性能：(pc + abs)混合，5％的礦物填充，阻燃，對于薄壁應用程序，注塑，維卡軟化點/ b 120 = 103°c，熱變形/ > = 85°c，非常好的ul，銻-，氯  和溴  阻燃劑  。

型號：pc/abs bayblend fr3015

性能：(pc + abs)混合，無筋，阻燃，注塑品位，維卡軟化點/ b 120 = 118°c，ul 94 v 0(1.5mm)，銻-，氯  和溴  阻燃劑  。

型號：pc/abs bayblend fr3012      

性能：(pc + abs)混合，無筋，阻燃，注塑品位，維卡軟化點/ b120 = 102°c，銻-，氯  和溴  自由阻燃，良好的光穩定性。

型號：pc/abs bayblend fr3011

性能：(pc + abs)混合，無筋，阻燃，注塑品位，良好的流動，高抗熱性，維卡軟化點/ b 120°c的溫度= 118，ul 94 v 0(1.5mm)，銻-，氯  和溴  自由阻燃，輝光線測試(gwfi)：960°c(2.0mm)，良好的光穩定性。

pc+abs塑料合金之所以命名為pc/abs，是因?yàn)檫@種材料既具有pc樹脂的優良耐熱耐候性、尺寸穩定性和耐沖擊性能，又具有abs樹脂優良的加工流動性。所以應用在薄壁及復雜形狀制品，能保持其優異的性能，以及保持塑料與一種酯組成的材料的成型性。主要改善了熔融流動性、成型性、可電鍍性及外觀性；與abs相比，則主要提高了耐熱性、抗沖性及薄壁制品的剛性。但從總的改性目標而言，獲得良好成型性，外觀性及降低pc成本常是最重要的。

長期經營以下產品:pc、pps、lcp、pa66、pa6、pc/abs、pp、tpu、tpx、tpv、pa11、tpe、pps等；均可以提供物性、報價、ul報告、rosh標準、sgs檢測報告，歡迎各商家來電洽談。

德國拜耳 pc+abs 750特性：

pc+abs合金塑料綜合性能較好，沖擊強度較高，化學穩定性電性能良好；與372有機玻璃的熔接性良好,制成雙色塑件,且可表面鍍鉻,噴漆處理，有高抗沖、高耐熱、阻燃、增強、透明等級別。流動性比hips差一點，比pmma、pc等好，柔韌性好；機械性能的卓越平衡低溫時也具備高沖擊強度，室內紫外線穩定性，較高的熱變形溫度80～125℃耐燃性u(píng)l945vb，色彩范圍廣泛；易于注塑和擠塑，吹塑加工；良好的電鍍性；一般密度在1.05-1.20之間。